Win5L and FlightOne Combo
Note: Runcam Micro Swift Pictured is not included in this Combo
Want to build the lightest quad? Xhover Win5L with 20x20 Stack is one of the most lightest frame, combined with the awesome FlightOne MilivoltOSD Flight Controller and Spark V2 4in1 Speed controller is one of the best 20x20 stack in the market today.
This Combo Includes:
- xHover Win5L Frame
- FlightOne MilivoltOSD Flight Controller
- FlightOne Spark V2 4in1 ESC
This frame features a built-in anti-vibration system in the main plate, reducing the amount of vibrations to the flight controller stack. The WIN5L also features a 3 hole 16x16 arm design to help keep it as light as possible.
This Frame was designed to support a 20x20 FC stack.
Size: Motor to Motor 200mm
- 4x Arms 5mm Chamfered
- 1x Top Plate 2mm Chamfered
- 1x Main Plate 2mm Chamfered
- 5x FC Soft mounts for Main Plate
- 1xBottom plate 1.5mm
- 1x3D printed Micro Cam mount Fits RunCam Micro and Foxeer Micro
- 1xHigh-Quality Steel Hardware
- 1x4x 28mm Standoffs
- 1x1 Battery Strap
- 6x Press nuts Pre-installed on the main plate
The FlightOne MillivoltOSD Micro flight controller is the most advanced, performance driven, flight controller ever designed. The MillivoltOSD uses a powerful F405 MPU, accompanied with the High Speed Invensense 20602 gyro, allows it to take full advantage of FlightOne efficient code to run at 32KHz for the best Performance possible.
The MillivoltOSD presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in FlightOne. Our filters along with the integrated FlightOne Gummies, allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past. Our boards come preloaded with software and defaults that should fly amazing for 99% of people.
In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt and RevoltOSD) and gives you the fastest response time possible as if the quad can read your mind.
Setting up the MillivoltOSD is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest, you can put the MillivoltOSD in upside down and backwards just solder to the closest motor pad and the FlightOne wizards will handle the rest. . The MillivoltOSD also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.
- weight: 3.3 grams
- Integrated Vibration Dampening FlightOne Gummies
- Inverter for Taranis and Futaba radios
- 3.3v or 5.0v for Spektrum, Taranis, etc
- LED Driver for WS2812b programmable LED
- High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever used
- Through hole solder pads – forms an I-Beam when soldered for extra strength
- FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
- Integrated buzzer driver
- Voltage and current ADC pins, for full voltage and current monitoring
- Full telemetry output support
- ESC flashing and configuration built into configurator
- Most active software development
- 3.3v and 5v voltage outputs
- 2 serial uarts
- Bluetooth expandable
- F4 processor
- 16mb of flash memory
- GPS expandable
- Pins into The FlightOne Spark Micro 4in1 ESC
- Dimensions: 25mm x 25mm
- Mounting holes: 20mm squared to center of holes
FlightOne Spark V2 4in1:
The FlightOne Spark 4n1 electronic speed controller (ESC) provides the power of BlHeli_S performance in a tiny package. This makes your electronic stack small, and eliminates the need for an additional PDB. The Spark 4n1 ESC performs great, helps clean up any build, and is perfect for your 3″ build.
- weight: 7.1 grams
- 20 mm x 20 mm mounting hole spacing
- 30 Amps per channel
- 5V voltage regulator capable of 3A continuous output
- D-Shot ready
- 2s – 4s compatible
- Pins to Millivolt Flight controller
- Voltage sent to flight controller
- Easy Install
- High quality components