Happymodel Crazybee F4 Pro V2 FC/ESC/RX AIO

Rewards

Rewards are coming soon!

In Stock

FREE SHIPPING ON ORDERS $60+

Ships Out From Rolling Meadows, IL

1-3 Business Days Transit Time

Out of stock

SKU 50970

Details

Crazybee F4 PRO V1 vs F4 PRO V2

V2.0 is able to work with 1-3s Lipo/LiHV
V1.0 can work with 1-2s Lipo/LiHV ONLY
V2.0 uses bigger bind and boot button , change the BAT/GND pad to “through hole”

Flight controller	MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-3S battery input (DC 3.5-13V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready ESC MCU Upgraded to EFM8BB21 Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS-2A Compatible) DSMX version Built-in Serial-based DSM2/DSMX compatible satellite receiver(Default RX2 was used for DSM2/DSMX receiver） No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc. Built-in Betaflight OSD (SPI Control) Built-in Current meter sensor Max up to 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter Built-in voltage detection BLHELI_S pass-through Ready Multi Serial port support Fully compatible with almost Brushless whoop drone Weight:4.3g
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1-3S LiPo/LiPo HV (3.5v/13v) Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.Hex Default protocol: DSHOT600
Receiver support	No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.

Frsky version betaflight_4.0.0_CRAZYBEEF4FR.hex

Flysky version betaflight_4.0.0_CRAZYBEEF4FS.hex

DSM2/DSMX version betaflight_4.0.0_CRAZYBEEF4DX.hex

No RX version betaflight_4.0.0_CRAZYBEEF4DX.hex

1 x Crazybee F4 PRO V2 flight controller
3 x Power cables
1 set Shock absorbing rubber and screws