Search
Spend at least $60 GET FREE SHIPPING My Cart

Happymodel Mobula7 HD 2-3S Whoop - Frsky

Rewards
Rewards are coming soon!

In Stock

FREE SHIPPING ON ORDERS $60+

Ships Out From Rolling Meadows, IL

1-3 Business Days Transit Time

Out of stock
SKU 50857
$149.00
Details

Mobula7 HD Features:

  • New Crazybee F4 PRO V2.0 AIO Flight controller 1-3s Lipo Compatible
  • 2S for indoor Cine whoop mode
  • 3S for outdoor Freestyle whoop mode
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • The lightest 1102 brushless motor only 2.7g with double ball bearings
  • Powerful and smoothly
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
  • Caddx turtle v2 + 1080p 60fps DVR ready
  • Camera Angle adjustable
  • VTX power switchable 25mw~200mw
  • Smartaudio ready , change VTX bands, powers, channels via OSD
  • Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
  • Full telemetry function ready (Frsky Non-EU and Flysky version support)
  • Special Breath light ready
  • Real Bind and Fly version
  • Compatible both for 2s-3s Lipo/LIHV


Mobula7 HD Specifications:

Brand Name: Happymodel

Item Name: Mobula7 HD 2-3S 75mm Brushless whoop drone

Wheelbase: 75mm

Size: 98mm*98mm*45mm

Weight: 48g(without battery)

Weight:72g(with Original 3s 300mah Lipo battery )

Mobula7 HD Package Includes:

Item Name

Qty

Mobula7 V3 Frame

1

Crazybee F4FR V2.0 PRO FC built-in Frsky NON-EU RX

1

EX1102 KV10000 Motor

4

40mm propeller(4cw+4ccw)

1

Caddx Turtle v2+1080p 60fps DVR

1

5.8G 40ch 25mw-200mw VTX

1

3S 11.4v 300mah 30C/60C battery

1

Propeller disassemble tool

1

Screwdriver

1

Mobula7 HD Spare Parts:

Motor

Mode: EX1102 KV10000

Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):
Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):1S-3S

Flight controller

(Frsky version) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)

Built-in Betaflight OSD(SPI Control)

Built-in Current meter Max 28A

Current meter scale set to 1175

Built-in 5V 1A Buck / Boost with LC filter

Built-in voltage detection

Onboard 4in1 ESC

MCU upgraded to EFM8BB21

Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Frsky NON-EU receiver Version

SPI BUS receiver

Frsky D8/D16 switchable

Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch

Failsafe support

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

VTX

Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband

Smartaudio ready
Weight: 3g

CADDX Turtle V2

Image sensor: 1/2.7" CMOS sensor

Horizontal: 800TVL

TV system: NTSC/PAL changeable

Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps

Power Input: DC 4.5-20V

FPV FOV: 155°

Recording FOV: 170°

Mini Illumination: 0.01lux

Image Resolution: 2 Megapixels

Lens: 1.8mm Turbo Eye Lens

Working Current: 380mA@5V/160mA@12V (low consumption)

OSD Menu: Yes (Support Voltage Display)

Video Files: MP4

Audio: Support

Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100

S/N Ratio: >60dB (AGC OFF)

Video Output: CVBS

Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)

Color: Red 

Lipo Battery

Capacity:300mAh
Voltage:11.4v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 65mmx18mmx11mm
Weight: 23g

Connector: XT30

Related Products

Check items to add to the cart or